How To Apply Fabric Wall Decals

For small and medium decals:

Step 1. Clean the wall thoroughly, removing dust, dirt, and grease. For 
best results, degrease the surface. Dusty or dirty walls will prevent the 
decal from sticking properly. Make sure your hands are clean and dry 
before applying. 

Step 2. Before applying your full decal, use the included sample labeled 
“TEST”. Stick it to your wall and remove it to make sure it adheres well 
and doesn’t damage the surface. This confirms that the wall is clean 
and suitable.

Step 3.  Peel the decal away from the backing. 

Step 4. Apply the decal to the wall, smoothing it out gently with your 
hands.

For large decals:

Repeat Step 1 and Step 2.

Step 3. Cut out the decal with the backing paper.
Step 4. Tape the decal to the wall where you want it (top and bottom).
Step 5. Remove the top tape and peel away half of the backing paper. Cut off that half of the backing paper.
Step 6. Stick the top half of the decal to the wall.
Step 7. Remove the bottom tape.
Step 8. Peel off the rest of the backing and stick the bottom half.

Done! Smooth it out with your hand.

For growth charts:

Repeat Step 1 and Step 2.

Step 3. Use a ruler to mark where the bottom of the chart should start.
Step 4. Tape the top and bottom of the chart to the wall.
Step 5. Check alignment with a ruler (top and bottom measurements).
Step 6. Remove the top tape and peel away half of the backing paper. Cut off that half.
Step 7. Stick the top half to the wall.
Step 8. Remove bottom tape and stick the bottom half.

Done! Smooth it out with your hand.